Directed Electronics 20.7 - Manual (Page 18)

18 © 2008 Directed Electronics. All rights reserved.
A U X
Aux
Command
: Press and hold for 1.5 seconds to acti-
vate the Trunk Release.
Feedback
: The trunk icon appears and the remote
plays a short tone.
Notes
: This is an optional feature. See your
sales rep/installer for details. The factory
default screen displays the trunk icon and
text. The text can be changed by your
installer using the Bitwriter programming tool.
A U X
Function shift
Command
: Press 1 to 4 times. (See Transmitter configuration table)
Feedback
: Display shows a text message across the bottom for the com-
mand received.
Notes
: Each Press then release, shifts the function of the command but-
ton.