D-Link DES-802 - Manual (Page 19)

10/100 Fast Ethernet Switch User’s Guide
Installation 9
2
3 I
NSTALLATION
This chapter describes the installation procedure for the 10/100 Fast Ethernet
Switch. The chapter includes information on installation locations,
connecting power, connecting network cables, setting the port duplex mode,
cascading, and network configuration examples.
Installation Site
You have the option to install the product on a table or mount it on a wall.
When installing, choose a sturdy, level surface in a ventilated area that is dust
free and away from heat vents, warm air exhaust from other devices and
direct sunlight. Avoid proximity to large electric motors or other
electromagnetic equipment.
Observe the following guidelines when choosing a location for the 10/100
Fast Ethernet Switch:
•
The surface must support at least 1.2 kg (2.6 lbs).
•
Air temperature should range from 32
°
to 122
°
F (0
°
to 50
°
C).
•
Humidity should be less than 90%, non-condensing.