D-Link DES-802 - Manual (Page 15)

10/100 Fast Ethernet Switch User’s Guide
Overview
5
Port 2: 10/100Mbps, N-Way UTP/STP
Port 2 operates at an user-selectable effective speed of 10 or 100Mbps for
half-duplex mode and 20 or 200Mbps for full-duplex mode. It is an N-Way
port, so it auto-detects and auto-configures according to the operating
standard (10Mbps Ethernet or 100Mbps Fast Ethernet) of connected devices.
Port 2 can operate up to 100 meters of Category 3, 4 or 5 shielded twisted-
pair or unshielded twisted-pair (STP/UTP) cable. Please use crossover
cabling unless you are connecting to a straight-through uplink port on a
switch or hub. Port 2 uses an RJ-45 connector.
Table 1 : Port and Cable Specifications
Port Connector Half/Full
Duplex Cable
2 – 10BASE-T and
100BASE-TX (N-
Way) RJ-45 10/20Mbps and
100/200 Mbps 100m,
Category 5
UTP/STP
1 – 10BASE-T (and
100BASE-TX, N-
Way for UTP/STP
ONLY) Combo:
UTP/STP,
BNC, AUI 10/20 Mbps
(100/200Mbps
and FDX for
UTP/STP
ONLY) 100m,
Category 3,
4, or 5
UTP/STP