Start up and use – Caple C993i User Manual

Page 9

START UP AND USE

Booster

The hob switches on selecting the sensor on the controls area. When this sensor is selected a sound is

uttered. Disconnect the key selecting the sensor.

Than select the key (+) for the wanted cooking area, which will positioning itself at level 1.The highest level

achievable is 9.

With the sensor (-) the power reduces until 0.

If with the 0 level selected the sensor (-) start functioning, the power becomes to 9 level.

Maintaining the sensor selected, the power selection repeats 2 times every second.

The zone can be disabled by pressing keys (-) and (+). A buzzer sounds and the corresponding display

shows "0"

The heat areas switch on and all stay at “0” until a power level is selected. If this does not succeed in 10

seconds, the hob automatically switch off.

Booster

Booster function

This function consists in bringing every back power zones at the highest level (position 10) for a

maximum period of 10 minutes. Passed this period the power returns that automatically selected with the

uttering of a sound. On the selected area display appears the letter "P".

When selected, the sensor is a beep sounds and the display shows "P".

Deleting Booster function

This function can be excluded any time reselecting on the comands zone the function “Booster”. The

same will bring back the power to the one preselected with the uttering of the confirming sound.

This function can be excluded also acting on the keys (+) or (-). In this case the power level will be

immediately higher or lower than that selected before the connection of the “Booster” function.

For example, if the power level is 2, you activate the booster and then you select the sensor (+), the

display shows the power of 3.

Conversely, if it is selected (-), the display shows the power level 1.

If, with the booster function enabled, you reselect the Booster function, the function is canceled and the

power level is reset to the initial one.

Booster