Start up and use – Caple C993i User Manual

Page 11

START UP AND USE

Operating the timer

The timer is activated by pressing the timer keys (+) or (-). The timer value can be selected between 1

and 99 minutes, and can be modified at any time.

To cancel the operation of the timer, select a timer value of <00> using the sensor (-), or switch off the

timer by pressing the corresponding sensors (+) and (-) at the same time.

Initial default setting of the timer

With the timer off, it is activated by pressing the timer keys (+) or (-). The initial value is "00" min by

default. On display of power zones appear the "t" flashing.

Booster

Timer running with cooking areas

All cooking areas can be commanded by the timer, but they can operate one at a time.

To make the cooking area function with the timer, operate as specificated below:

•activate the timer;

•select one cooking area. A led will lights both on the timer and on the selected cooking area;

•in 10 seconds select the time to pre-set on the timer. If this do not happen, the area will authomatically

switch off.

Programmed time, after 10 seconds, the countdown begins for the cooking area selected. A confirmation

sound and display the operation of the cooking zone and timer stop flashing.

Booster