Caple C993i - Manual (Page 5)

5
INSTALLATION
General Instructions
•The installation and the connection must
be done only by a qualified electrician.
Refer only to an electrician who knows local
and supplemental rules and regulations. Take
care of that the work is carried out in respect
of these rules. The producer is not responsible
for damages caused by incorrect installation or
connection of the appliance.
•The appliance electrical security is guaranteed
only if this is connected to a regular grounded
conductor. It is important to check that this
condition is satisfied because it is a fundamental
condition. If in doubts call a skilled technician to
check the installation. The producer do not accept
responsibility for damages caused by the absence
or interruption of the grounding conductor.
•The appliance must not be linked up to the
electrical system with an extension; extensions do
not warrant the security of the appliance.
•The hob should not be installed over a
dishwasher, a tumble dryer, a washing machine,
a cooling appliance, an oven or cooling fan. On
the one hand the high temperatures released can
damage these appliances, on the other hand in
this way the ventilation of the hob is not ensured.
•The installation and the assembly of the hob in
non-stationary places, like for example a ship,
can be installed only by skilled technicians to
guarantee safety during the functioning.
•If under the appliance there is a drawer, do not
store flamable object inside of it (i.e. canisters).
•Make sure that after the installation, the hob
electrical system connection wire is not subjected
to mechanical stress, (i.e. fixed to a drawer).
•The hob veneerings must be manufactured with
thermoresistant adhesive (100°C), so they cannot
detach or buckle. Also the back profiles must be
thermoresistant.
•On one side and on the back side of an installed
ceramic hob there can be walls or furnitures of
every height, while on the other side the furniture
or an existing appliance must not be higher than
the hob.
RECOMMENDED DISTANCE BETWEEN APPLIANCE AND HOOD
50 mm
50 mm
NOT RECOMMENDED NOT RECOMMENDED