BUG-O Systems BVW-1000 - Manual (Page 9)

8
3. Brief Introduction of Products
3.1 Product Overview
EGW-BUG automated vertical welding machine, which is designed and
manufactured by the Bug-OAll-Time Mechanical & Electrical Equip. Co., Ltd, is a
high-efficient automated vertical welding machine. The product is designed according to
the requirements of manufacturing and installation of large scale cylinder, furnace, ship
and storage tank and equipped with welding power source and EGW carriage machine.
3.2 Configurations
The complete product package consists of the following parts listed in Table 1.
Welding power source and bench,
Control cabinet for power distribution,
Enclosed windproof welding machine frame equipping with traveling system
Power distribution control system,
Table 1 Configuration of EGW-BUG Automatic Welding Machine
No. Component Specification/Model Qty.
1
Power supply bench
and power distribution
control cabinet
1750mm(L)×1140(W)×
1200(H)
1
2
Forward windproof
standard welding frame
1700mm(L)×2000mm(W)
× 4000mm(H)
1
3 Control cable 1.5 mm²× 9p× 60m 1
4
Power supply cable
(4mm²×3+2.5mm²×2)× 60m 1
5 Welding cable 120mm²× 60m 1
6 Welding earth wire 120mm²× 10m 1
7
Circulating water pipe
(in/out)
3m/3m 1
8 CO2 heater AC220V/1P/50/60Hz 1
3.3 Performance and Characteristics
● Welding Power Source and Bench, Control Cabinet for Power Distribution
The power source is installed in the bench illustrated in the figure. In addition, this bench
is also used to store the welding cable, the control cable and construction tools. At the