BUG-O Systems BVW-1000 - Manual (Page 20)

19
5. Maintenances
Security Notices
The equipment maintenance is forbidden before reading through maintenance
instructions in this manual.
Beware of electric shock
The equipment should be maintained by those who have professional
qualifications.
Before the operation, be sure to switch off the input power source.
It is forbid
den to touch the regions giving off heat.
To guarantee normal services of equipment utmost, periodic maintenance
should be carried out. Once there are some abnormal phenomena, we must
stop to repair. Only if the normal operation is confirmed can it be reused.
5.1 Routine Maintenances
Cut off all the conducting wires which are connected with the power source, and then
carry out the routine maintenances.：
Examine the Cleanliness Condition of the Machine Framework
-----Examine whether there is dust or other goods blocking the driver or sliders or not.
It needs to keep the machine framework clean.
Examine the Adhesive Spatters
-----Examine whether there is adhesive spatters on the basement, the guiding axle of
supporters, walking wheels of the welding trolley, the sliding axle and screws or not.
If adhesive spatters exist, they need to be cleaned immediately.
Examine the Tightening Degree of Bolts
-----Tighten those loose bolts.
Examine the Insulation Condition of the Welding Torch
-----Examine the insulating layer of the welding torch and it need to be examined
after every damage.
Warning