BUG-O Systems BVW-1000 - Manual (Page 12)

11
four symmetric lifting eye for the lifting of the machine framework.
Fig.3 The top platform
2. Transverse walking device for the machine framework:
The transverse walking system is composed of the mechanical transmission part and
the electric control part. There are three components in the mechanical transmission part
and they are the speed reduction motor, the driving wheel and the driven wheel, as
shown in Fig. 4. Both the driving component and the driven component can move up and
down along with the adjustment installed on the four columns at two sides of the machine
framework, which can be used to adjust the complete framework according to different
plate amplitudes. The adjustment range is 1500mm~3000mm.
Fig.4. Transverse walking system of the machine framework
Frame walking motor is controlled by frequency converter. Walking speed is controlled
by setting frequency as well as acceleration and deceleration time on the frequency
converter. The frequency converter is installed inside walking control cabinet. Walking
operation is centralized on hand control box.
Hole for upper
and lower
Lifting eye Lifting eye
Speed reduction
motor
Driving wheel Driven wheel