BUG-O Systems BVW-1000 - Manual (Page 21)

20
Examine the Cables and the air hole
-----Examine the damage condition of the cables and the air hole.
Examine the Operation Noise
-----Examine whether there is some operation noise from the supporter or not. If
there
is, check whether the working of the machine framework runs normally.
5.2 Periodic Maintenances
When the running time exceeds 3 mouths or 300 hours, it needs to stop to examine and
maintenance the welding machine.
● Examine Gear Conditions for the Walking and Transmission of the Machine
Framework and the Welding Trolley
-----It needs to be exchanged if the transmission gear is damaged.
● Examine the Clean Degree of the Inner Supporter and the Control Box
-----It needs to keep the inner supporter and the control box clean all along.
● Examine the Wear Condition of the Driving Wheel and the Pulley
-----It needs to be exchanged if there are some damages.