BSS Audio FDS-388 OMNIDRIVE Owner's Manual - Manual (Page 32)

32
XOver Screen
11.0 XOver Screen
Quick Reference
1 To adjust a band gain value, press the top soft key, press
the parameter wheel to select a band and turn the pa-
rameter wheel to adjust.
2 To adjust the limiter threshold for an individual band press
the middle soft key, press the parameter wheel to select a
band and turn the parameter wheel to adjust the thresh-
old.
3 To adjust a crossover frequency, press the bottom soft key,
press the parameter wheel to select a crossover point to
adjust and turn the parameter wheel to move it.
The XOver (Crossover) Screen gives the user access to the top level of crosso-
ver frequency adjustment in addition to control of the band gain and limiters.
The left hand end of the top line of the screen gives the master band edge roll-
off in dB per octave and the edge shape; whether it is Linkwitz-Riley (L-R),
Butterworth (But), or Bessel (Bes). The centre of the top line contains the
current program number, a letter denoting which backup/swap memory is
being used and an asterisk indicating when the program has been edited. To
the right of the top line are the current program OEM name and user name.
The band names in the horizontal line between the gain and limiter threshold
values are for identification only and can be adjusted in the XOver More
Screen, refer to Section 13.0, XOver More Screen - Name
Program number
Swap status
Edited flag
OEM name
Program name
Band name
Crossover frequency
Limiter threshold
Band gain Band edges
Master rolloff shape
Master rolloff slope