Bronkhorst PROFIBUS-DP slave interface - Manual (Page 20)

BRONKHORST ®
5 DOWNLOAD TO MASTER
When slave has been installed and all settings are done, everything has to be downloaded to the master. Point to
actual master and select [online][download]. When this is ready, from that moment on there will be data-exchange
between master and slave. The red Led on the instrument will stop blinking slowly and will go off when data-exchange
is O.K.
Data-exchange between master and slaves can be checked with Sycon.
Select [online][start debug mode]. When everything is O.K. the screen looks like this:
• It is possible that your master configuration software does not support this option.
• When there is something wrong, see ‘device diagnostic’ for details.
Page 20 PROFIBUS DP interface 9.17.025