Bronkhorst PROFIBUS-DP slave interface - Manual (Page 15)

BRONKHORST ®
3.4 S
LAVE CONFIGURATION SETTINGS
Bronkhorst PROFIBUS DP instruments offer many available modules/parameters for operation of the instruments.
These modules/parameters can be selected by means of the master configuration tooling software (after loading the
GSD-file: BHT_0586.GSD).
After installing the slave to the PROFIBUS DP system, point to actual slave and select: [slave configuration]. In the first
table all available modules are listed. Select those instrument variables you want to use. The selected modules will be
displayed in the second table.
More information about modules/parameters or an example of counter and alarm usage can be found
in the manual “917023 Operational instructions digital instruments”
This document can be found at:
http://www.bronkhorst.com/en/downloads/instruction_manuals/
Page 15 PROFIBUS DP interface 9.17.025