Broadata Communications 272E Series - Manual (Page 19)

BCI 272E User’s Manual
Digital Fiber Optic Video/Audio/Data Transport System
Broadata Technical Support, (800) 214-0222 20
3. If the POWER indicator and Optical Link indicator are
ON, but the audio/video channels are not operating,
then:
a. Check to see that the attached user equipment is turned
on.
b. Both ends of the link are connected to the
corresponding equipment and to the same
corresponding channel port.
c. Cable connections at both the video/audio channels
are securely fastened to each connector. Turn the
power off, then back on to reset the link.
d. Output levels of the user’s video and audio sources are
not above the allowed input levels of the 272E units
(see Section 5.0 Specifications).