Broadata Communications 272E Series - Manual (Page 16)

BCI 272E User’s Manual
Digital Fiber Optic Video/Audio/Data Transport System
Broadata Technical Support, [email protected] 17
The 272E derives power from an external 12VDC power supply. This
power supply is a wall mounted AC/DC adapter, 100-240 VAC, 50-60 Hz,
at 1A. This power supply comes standard for the 272E unless otherwise
specified.
To provide power to the 272E, simply connect the power cord, already
provided with the units, and connect it to the wall jack. (You will find one
power cord per unit). Once the power cord has been connected to the
wall jack, connect 12VDC to the unit and the unit should power up
immediately.
If you have any problems or concerns, regarding the installation, make
sure that you have taken the proper steps to ensure a proper power
connection. Otherwise, feel free to contact us for any questions you
may have.
3.0 OPERATION
After the installation procedure is completed, the units are ready for
operation. To operate the BCI 272E units, simply apply power as
indicated in the previous step. Note that the front panel link status
indicator, shown in Table 2, will be activated.