BrightSign HD1010w WiFi Setup - Manual (Page 5)

2.2 BrightSign Network Wi-Fi Setup
Use this option to setup your wireless BrightSign to connect to a BrightSign Network account. If you do not
have a BrightSign Network account, you can request a trial account at [email protected].
1. Under Tools Menu, select Setup BrightSign Unit
2. Select Networked with Brightsign Network under Unit Configuration
3. Select the Brightsign Network Group you’re configuring the unit to use
4. In the lower left, Select Wireless from the dropdown menu
a. Enter your SSID
b. Enter your Wireless network password
5. Click Create Setup Files and save to a flash card
6. Power up the BrightSign with your setup card
The BrightSign will call into your account, to the group you’ve
selected above. The unit should be listed under Manage -> Status
in less than a minute.
Tip 1: If the BrightSign doesn’t appear under Manage status, publish a presentation that shows the date, time,
and an RSS feed, to a different card.
Tip2: If the BrightSign has a red icon under Manage Status, please
confirm that you have published a project for the group the unit is
calling into.
Note: In order to use wi-fi, you must configure wi-fi via the setup card (Setup BrightSign Unit process) and
unplug the Ethernet cable before powering on the BrightSign with the wi-fi setup card inserted.