BrightSign HD1010w WiFi Setup - Manual (Page 3)

1. Overview
The BrightSign HD210w (simple looping player) and the HD1010w (flagship model) now support remote
content delivery via Wi-Fi networking. Both models also include an Ethernet port allowing you to select the
best network connection for your application.
Using BrightAuthor 2.2, you can configure Wi-Fi units for
content updates using the same network connectivity methods as previous BrightSign Ethernet models: Stand-
Alone, Simple File Networking or BrightSign Network.
1.1 Wireless Specifications

Hardware: A/B/G/N (2x2 Radio Antenna)

Encryption: Open, WEP (64, 128), WPA1-PSK (TKIP), WPA2-PSK (AES)
1.2 Software Requirements
To use a Wi-Fi enabled Brightsign, you’ll need the following:
1. Firmware version 3.3.69 or later
Download 3.3.78 or later here .
2. BrightAuthor 2.2. or later – Please download the latest version from Brightsign Support
Download BrightAuthor 2.2 or later here.