7a. ldap server configuration – BrightSign BSNEE Installation Guide v.4.0 User Manual
Page 25
BSNEE Installation Guide
22
7a. LDAP Server Configuration
If you selected LDAP as the
Authentication Provider in the previous step, consult the below
information to learn more about setting parameters in the
LDAP Settings window. If you did
not select LDAP as the
Authentication Provider, move on to Step 8.
Note: Unless otherwise indicated as “optional”, each field below must be specified.
Server Configuration
A.
Server Name: A common format IP address or domain name of the target LDAP server
or gateway. You can also specify a port number after the colon (“:”) delimiter. If you do
not specify a port number, port 389 will be used by default.
B.
User Name (optional): The username/login of a Windows Account that has read
access to the directory. The credentials can be entered either in common format (e.g.
“jdoe”) or in LDAP Data Interchange Format (LDIF) (e.g. “uid=jdoe, ou=people,
dc=example, dc=org”).
C.
Password (optional): The password of the Windows Account specified in the User
Name field above. This field is only required if a User Name is specified.
D.
Auth Types: The Authentication Type used in
System.DirectoryServices.
S
for more information about some of the Authentication Types.
a. Basic
b. Anonymous