beautypg.com

Bompani BO364AA/E User Manual

Page 9

background image

9

3PCLIOBILBO-02

SWITCHING THE COOKING TOP ON

Press key to switch the top on.

All the displays relative to the cooking zones switch on in

the standby position.

The control unit remains active for 10 seconds.

If no cooking zone is selected within this time, the ccoking

top switches off automatically.
SWITCHING THE COOKING AREA ON

Select the desired cooking zone and press one of the

keys.

Press key to go to position 9 (max. power) or key to

go to position 1 (min. power).

Once this operation has been completed you can adjust the

temperature with the or keys.

The power of the single cooking zone can be adjusted in 9

different positions and will be shown on the relative luminous

display E with a number from “1 to 9”.
RESIDUAL HEAT

If the temperature of the cooking zone is still high (over

50°) after it has been switched off, the relative display will

indicate the symbol (residual heat). The symbol will only

switch off when the burn risk in no longer present.
POT DETECTION

If the symbol should appear on one of the cooking area

displays, it means that:

1)The recipient being used is not suitable for induction

cooking.

2)The diameter of the recipient used is inferior to that

allowed by the appliance.

3) No recipient is present.
TIMER

This function allows establishing the time (from 1 to 99

minutes) for automatically switching the selected cooking

zone off. Switch on at least one cooking zone and adjust

the temperature.

Press simultaneously the

G and H key to enter

the timer function. Press again the G and H key

simoultaneously to select the cooking zone on which you

want to activate the timer. The selected cooking zone will

be indicated by a flashing led located on one of the corners

of the timer display F.

Set the auto switching off time by pressing the

G or

H key. The cooking zone on which the timer has been

activated is indicated by a steady led at one of the corners

of the timer display I.

An acoustic signal will indicate the timer expiration and the

relative cooking zone will automatically switch off. Press

any of the keys to stop the acoustic signal.

In order to disable the timer on a cooking zone press

simultaneously the

G and H key to enter the

timer function. Press again the G and H key

simoultaneously to select the desired cooking zone. Press

the H key until reaching position .

QUICK / BOOSTER HEATING

This function further reduces cooking time in a given area

taking the temperature to the maximum power for a 10

minute interval. At the end of this interval, the cooking

area power automatically returns to level 9.

The use of this function is recommended for heating a

large quantity of liquid in a very short time (i.e. water for

cooking pasta) or other dishes.

To activate this function, select the cooking area and

press the key up to level 9. Press the key again.

An acoustic signal will be emitted and a symbol will be

visualised on the display E relative to the area.
CONTROL PANEL LOCK

It is possible to block the controls to prevent the risk of

unintentional modification of the settings (children, cleaning

etc.). By pressing the

key, the controls are blocked and

the relative warning light I switches on (Fig.9)

To release the controls and change the settings

(e.g.interrupt cooking), the

key must be pressed. The

cooking top can however be switched off even when the

controls block is activated. In this case the controls block

remains active when the top is switched on again.
SWITCHING THE COOKING AREA OFF

To switch a cooking zone off, press simultaneously the

and key of the relative zone, or press the key until

reaching position .
SWITCHING THE COOKING TOP OFF

To turn off the cooking top entirely hold down the key.
SAFETY SWITCH

The appliance has a safety switch that automatically

switches off the cooking zones when they have been oper-

ating for a certain amount of time at a given power level.

POWER LEVEL

OPERATING TIME LIMIT (hours)

1 - 2

6

3 - 4

5

5

4

6 - 7 - 8 - 9

1,5

MAINTENANCE

Remove any residues of food and drops of grease from the

cooking surface by using the special scraper supplied on

request (Fig.10).

Clean the heated area as thoroughly as possible using

suitable products, and a cloth/paper, then rinse with water

and dry with a clean cloth.

Using the special scraper immediately remove any

fragments of aluminium and plastic material that have

unintentionally melted on the heated cooking area, or

residues of sugar or food with a high sugar content.

In this way, any damage to the cooktop surface can be

prevented. Under no circumstances should abrasive

sponges, or corrosive chemical detergents, such as oven

sprays or stain removers, be used.

WARNING: STEAM CLEANERS MUST NOT BE USED.
DISPOSAL OF OLD ELECTRICAL APPLIANCES

The European Directive 2002/96/EC on Waste

Electrical and Electronic Equipment (WEEE),

requires that old household electrical appliances

must not be disposed of in the normal unsorted

municipal waste stream. Old appliances must

be collected separately in order to optimise the

recovery and recycling of the materials they

contain and reduce the impact on human health and the

environment.

The crossed-out dustbin symbol on the product reminds

you of your obligation regarding separated waste collection.

Consumers should contact their local public service or their

local dealer for more information on the correct disposal of

exhausted household appliances.
THE MANUFACTURER DECLINES ALL

RESPONSIBILITY FOR EVENTUAL DAMAGES

CAUSED BY BREAKING THE ABOVE WARNINGS. THE

WARRANTY IS NOT VALID IN THE CASE OF DAMAGE

CAUSED BY FAILURE TO COMPLY WITH THE ABOVE-

MENTIONED WARNINGS.