Dynamic Distributors Switch Cubes - Manual (Page 21)

21
System Specification:
System Power 12VDC 30Amps
Operating Temperatures 32 °F to 122°F (0°C to 50°C)
Physical Size Front / Rear Module 2.0” X 3.0” x 1.5”
Display Module 2.0” X 3.5” X 1”
Maximum Amperage Load:
Headlight
High Beam 10A
Low Beam 10A
Turn Sign/Marker Light 5A each
Brake/Running Light 5A
Horn 5A
Starter Solenoid 100A Momentary (50A
Continous)
NOS Solenoid 5A
Compression Release 5A
Ignition Coil 5A
Note:
The LINX™ system draws a very small amount of current in the “Off”
mode. It is recommended that the battery be maintained with a charger if
the bike is not ridden regularly. A properly maintained battery adds life
and dependability to your battery.
A p p e n d i x