Dynamic Distributors Switch Cubes - Manual (Page 7)

7
Display Module:
When the system is powered-on, a self-test will run and if any faults are
noted, they will be displayed. After this, the logo will be displayed for 3
seconds, and then the module will enter the operational mode. The
following items will be displayed on the screen in the operational mode:
Information & Icons on LCD Screens:
• Speed (in MPH or KPH).
• Engine RPM (digital readout and bar graph).
• Clock.
• High Beam “ON” Icon.
• Bike in “Neutral” Icon.
• Information Window (one of the following)
• Turn Signal Left / Right
• Hazard Flasher On.
• Run / Kill Status.
• Text information window: (toggles between the following with the
# key on the right handlebar switch).
• Odometer
• Trip 1 (Reset by pressing the # key for 3 seconds)
• Trip 2 (Reset by pressing the # key for 3 seconds)
I n s t r u m e n t a t i o n