Dynamic Distributors Switch Cubes - Manual (Page 14)

14
Information & Alert Conditions
Text information window:
The Text information window is located at the bottom of the LCD
screen. To toggles between the following items, press the (#) key on the
right handlebar switch.
• Odometer
• Trip 1 (Reset by pressing the # key for 3 seconds)
• Trip 2 (Reset by pressing the # key for 3 seconds)
• Temperature and Voltage.
• System Alert text message.
Alert Text By-Pass:
If an alert condition exists (an event or fault) it will be displayed in the
LCD information window and LED warning alert indicator icons will
illuminate. If the rider would like to bypass the warning message he can
toggle back to his previous setting by momentarily pressing the “pound
(#)” button on the right handle bar switch.
Event or Fault Clearing:
If the LINX™ system detects an abnormal condition, a message will be
displayed on the LCD screen and the Alert Icons will illuminate. The
message and alert icons will remain until the fault is cleared. If the
condition requires a repair, such as a bulb replacement or a short, once
the repair has been made and the key switch has been cycled off then on,
the alert message will be cleared from the LCD screen.
O p e r a t i o n / F u n c t i o n