Beurer GL 50 (mg/dL) - Manual (Page 31)

Beurer GL50 mg/dL 31
6.4 Deleting individual measured values from the memory
1 Press the buttons as described in “6.1 Displaying individual values” on page 28 until the value
that you would like to delete is displayed.
2 Press and hold the ON/OFF button. Also press the “–” button for two seconds.
“ ”, “Mem” and the number of the value to be deleted flash.
Press the ON/OFF button again. “ ”, the number of the value to be deleted, “Mem” and
“ ” are displayed.
If you do not wish to delete the value, briefly press the “+” or “–” button. You are taken back
to the memory area.
3 The device then indicates that the subsequent measured value has moved to the memory
space of the deleted measured value.
6.5 Deleting all stored values
Proceed as described in “4.2 Making and changing basic settings” under the section entitled “Delet-
ing stored values” on page 16.
6.6 Evaluating measured values on a PC
The GL50 monitor features an integrated plug-in USB stick. The blood glucose evaluation software
GlucoMemory is installed on the USB stick (for position of the USB connection, see page 11). The
GL50 is compatible with Diabass and SiDiary.
The blood glucose evaluation software GlucoMemory is pre-installed on the monitor’s USB stick. You
do not need to install the software locally on a PC. This software enables you to evaluate your meas-
ured values, add insulin doses and print or export your results as a PDF or CSV file. The software helps
you and your GP to better monitor your blood glucose level.
For more information, please read software manual for the GlucoMemory software. Including all the nec-
essary information and a detailed description of how to use the software (in English and German).
Note
• An effective evaluation is only possible if you have set the date and time correctly (see “Setting the
date and time” on page 15).
• Measurements cannot be taken while the USB stick is connected to a PC.
• The measurements remain saved on the blood glucose monitor when the USB stick is removed from
the PC.
• It is not possible to save software entries on the USB stick; Values are read only.