Beurer BC 32 User Manual

Page 76

Table 4

Recommended separation distances between portable and mobile RF communications equipment and the BC 32
The BC 32 is intended for use in an electromagnetic environment in which radiated RF disturbances are controlled. The customer or the

user of the BC 32 can help prevent electromagnetic interference by maintaining a minimum distance between portable and mobile RF com-

munications equipment (transmitters) and the BC 32 as recommended below, according to the maximum output power of the communica-

tions equipment.

Rated maximum output

power of transmitter

(W)

Separation distance according to frequency of transmitter

(m)

150 kHz to 80 MHz

Not applicable

80 MHz to 800 MHz

d = 1,2

800 MHz to 2.5 GHz

d = 2,3

0,01

–

0,12

0,23

0,1

–

0,38

0,73

–

1,2

2,3

–

3,8

7,3

100

–

For transmitters rated at a maximum output power not listed above, the recommended separation distance d in meters (m) can be esti-

mated using the equation applicable to the frequency of the transmitter, where P is the maximum output power rating of the transmitter in

watts (W) according to the transmitter manufacturer.

NOTE 1 At 80 MHz and 800 MHz, the separation distance for the higher frequency range applies.

NOTE 2 These guidelines may not apply in all situations. Electromagnetic propagation is affected by absorption and reflection from struc-

tures, objects and people.

751.598 - 1114 Irr

tum und Änderungen vorbehalt