Beisler 1710-5 - Manual (Page 28)

2-6
3 Programming and Machine Setup
As a factory setting, three sewing programs are contained in the memory of
the machine, which can be selected and used by the operator. These pro-
grams are composed based on long-termed experience and should be suf-
ficient for the normal use of the machine. The available sewing programs are
explained in part 1 ‘Operators Manual’ of the Operating Instructions.
The available programs can be modified and adapted to the individual require-
ments of the customer. You can also program new programs. All modified or
new programs can be copied to a memory module to backup the data.
3.1 General hints
When you want to set or modify certain functions, you will use the arrow keys
to position the cursor on the respective icon and press the Plus/Minus keys to
change the setting or value.
For several functions you can press the Special key to open the setup page
for the selected function.
The machine setup can be modified on the Setup pages:
Setup -01 Machine type
Setup -02 Position actor, turn direction, needle position, sewing speed,
storing error messages, enable access code
Setup -03 Sewing foot, photo cell
Setup -10 Inputs and Outputs
3.2 Select Setup pages
1. Position the cursor on the program number and press the Minus key. This
will be displayed:
: 3000
[ ]
XXX
DEUTSCH
000
PROG.
2. Position the cursor on the left-handed „x“ below the key icon.
3. Press the Minus key to display a zero.
4. Position the cursor on the middle „x“ and press the Minus key.
5. Position the cursor on the right-handed „x“ and press the Minus key.
6. Position the cursor on the program number 000 and press the Minus key.
Setup page -01 will be displayed.