BECKHOFF CB4051 - Manual (Page 25)

LCD Chapter: Connectors
Beckhoff New Automation Technology CB4051 page 25
The following table shows the pin description for the second bit ("odd" pixel). This connector will only be
used if a display with two pixels per clockcycle is to be connected.
Pin Name Description
1 GND ground
2 GND ground
3 TXO10# LVDS odd data 0 -
4 TXO10 LVDS odd data 0 +
5 TXO11# LVDS odd data 1 -
6 TXO11 LVDS odd data 1 +
7 TXO12# LVDS odd data 2 -
8 TXO12 LVDS odd data 2 +
9 TXO1C# LVDS odd clock -
10 TXO1C LVDS odd clock +
11 TXO13# LVDS odd data 3 -
12 TXO13 LVDS odd data 3 +
13 DDC_CLK EDID clock for LCD
14 DDC_DAT EDID data for LCD
15 VCC 5 volt supply