BECKHOFF IPxxxx-B520 - Manual (Page 19)

IP Config Object
IPxxxx-B520 16
3 IP Config Object
IP Config Object The coupler provides the vendor specific object class to access its status,
diagnostic and configuration data. Within the IP Config Object the full
range of Registers and Status-Information of the IPxxxx and the channels
is accessible.
Class Code:
100 (64hex)
Class Attributes
Attribute
ID
Access
Rule
Name Data
Type
Description Semantics of
Value
1 Get Revision UINT Revision of implementation 1
2 Get Max. Instance UINT Max. number of instances 1
Instance Attributes
Attribute
ID
Access
Rule
Name Data
Type
Description Semantics of
Value
1 Get/Set Terminal
Number
USINT Number of terminal 0: Coupler
>0: Channels
2 Get/Set Table Number USINT Number of table See IPxxxx
/Channel Descrip-
tion
3 Get/Set Register Num-
ber
USINT Number of Register See IPxxxx
/Channel Descrip-
tion
4 Get/Set Register Data DWORD Register Value See semantics
5 Get IP-Status BYTE Status of the IPxxxx See semantics
6 Get Channel Status WORD Status of the Ipxxxx
Channel
See semantics
10 Get/Set IO Error Action BYTE Action to be performed if a
fieldbus error occurs see semantics
15 Get Input Size Poll
Mode
BYTE Number of Bytes pro-
duced via the Poll mode
16 Get Input Size Bit
Strobe Mode
BYTE Number of Bytes pro-
duced via the Bit Strobe
mode
17 Get Input Size COS
/ Cyclic Mode
BYTE Number of Bytes pro-
duced via the Change of
State / Cyclic mode
18 Get Output Size
Poll / COS/
Cyclic Mode
BYTE Number of Bytes con-
sumed via the Poll /
Change of State /Cyclic
mode
25 Get/Set Bus Off
Behavior
BYTE Behavior of IPxxxx-B520
after detection of a Bus-
Off event see semantics