Setting the time – Dynex DX-R20TR User Manual

Page 29

Text mode
Original mode

Using the TV

Setting the time

To set the time:

1 Press the MENU button. The TV on-screen display (OSD) opens.
2 Press the VOL+ or VOL– button to select TIME, then press the CH–. The TIME menu

opens.

3 Press the CH+ or CH– button to select TIME, then press the CH+ or CH– button to

select --:-- AM.

4 Press the VOL+ or VOL– button to change to setting.
5 Press the MENU button one or more times to close the OSD.

Note: After a power failure or if you disconnect the power cord, the time setting is lost. You

will need to reset the time.

DX-R20TR.fm Page 28 Thursday, January 18, 2007 3:19 PM