BECKHOFF CX9020 User Manual
Page 27
Mounting and wiring
The only existing channel is transferred via the tip, the remainder of the sleeve is used for earthing.
The audio settingsa can be done via the Beckhoff CXConfiguration Tool. Open the tool via
Startmenue > Control Panel > CX Configuration
Navigate to tab "Miscellaneous" to change audio settings.
The checkbox "Enable Audio Device" enables or disables the interface. With "Audio Settings" a "Mixer" can
be called. The volume for the output and input is selected with the slider. The input source can be selected
with "Input select". Only one source (LINE or MIC) can be active at once. "OK" confirms these settings.
CX9020
27
Version 1.1