Measurements with sample configurations – BECKHOFF CX1100-09xx UPS User Manual
Page 24
Commissioning
22
Embedded PC
Measurements with sample configurations
As an example for a real load some Embedded PC configurations have been tested. The retention time was
measured in relation to switch setting. The first test configuration is a CX1000 System (CX1000-0111) with typical
configuration. Only the system interface N001 is connected to the basic system. The K-bus is supplied via the UPS,
too. As terminals one digital input and one output terminal are connected to the bus. The system configuration
shown in the picture.
The retention times are: