BECKHOFF C3620 - Manual (Page 14)

Installation Instructions
Power Supply Connection
The 5-pin CAGE CLAMP plug connector and mounting flange illustrated is
located on the PC housing in order to connect the power supply.
Socket at the PC housing Connection socket when
fitted with 100-240 V
AC
,
50-60 Hz power supply
unit (standard)
Technical data Connecting socket
Number of contacts 5
Contact spacing 5 mm
Minimum conductor cross-section 1.5 mm²
Minimum conductor cross-section
(AWG)
16
Rated voltage (EN) 250 V
Rated voltage (CSA) 300 V
Current EN [A] 12 A
Current CSA [A] 15 A
Length of stripped conductor 8 to 9 mm
Power Supply Configuration
Supplied mains power unit The Industrial PCs is either fitted with a 100-240 V
AC
, 50-60 Hz power
supply unit (standard) or with a 24 V
DC
power supply unit (with the option of
an uninterruptible power supply, UPS).
Current carrying capacity of
the 100-240 V power
supply unit
Output voltages from
the 100-240 V power
supply unit
Current loading
maximum
+3,3 V 16 A
+5 V stand by 2 A
+5 V 25 A
-5 V 0.3 A
+12 V 13 A
-12 V 0.8 A
Current carrying capacity of
the 24 V power supply unit
Output voltages from
the 24 V power supply
unit
Current loading
maximum
+5 V 25 A
-5 V 1 A
+12 V 10 A
-12 V 1.5 A
12 C3620, C3640