Becker TRAFFIC ASSIST Z101 - Manual (Page 8)

8
>>> THE TRAFFIC ASSIST
> D
> GB
> F
> I
> E
> NL
Traffic Assist - basic unit
The basic unit contains all the electronics:
• an integrated GPS antenna,
• a TMC receiver for the reception of
traffic messages,
• a touchscreen,
• an integrated loudspeaker for the out-
put of messages during navigation.
On the sides of the unit, there are also var-
ious connections and ports.
You will find more details of the unit
under:
• See “Technical Data” on page 64.
Cable for power supply from
cigarette lighter
This cable allows the unit to be connected
up to the car's cigarette lighter.
The power supply must satisfy the follow-
ing requirements:
• DC current 12/24 volts
0.5 amps
Battery
When depleted, the integrated rechargea-
ble battery can be recharged by connect-
ing the Traffic Assist to the power supply.
For this purpose, connect the unit via a car
power adapter to a 12/24 V socket in a ve-
hicle or via the optional mains power sup-
ply unit to the 230 V mains.
USB connection cable
The USB connection cable can be used to
connect the unit to a standard personal
computer by means of the USB port.
However, to use the data on the PC, you
will first have to install the free "Active
Sync" software from Microsoft
® .
Unit bracket
The Traffic Assist can be mounted in the
vehicle using the unit bracket.
Map data
The map data for navigation is pre-in-
stalled in a 2 GB internal memory.
Note:
You can charge the Traffic Assist via the
car charger cable included in the scope of
delivery or via the optionally-available
mains power supply unit.
When the Traffic Assist is connected to a
PC, it is supplied with power via the PC
and does not consume battery power.