Becker TRAFFIC ASSIST Z101 - Manual (Page 17)

17
GERNARAL OPERATION >>>
> D
> GB
> F
> I
> E
> NL
Connecting to socket
Connecting up to power supply
Connection to the public mains grid is
achieved using the optionally-available
mains power supply unit. Please proceed
as follows to connect to the mains:
> Hold the USB socket at the corrugated
grip area and push it into the connect-
ing socket on the Traffic Assist or into
the connecting socket on the carrier
plate as far as the stop, without using ex-
cessive force.
> Use the plug to insert the mains section
in the socket.
TMC antenna
The TMC antenna included in the acces-
sories is used to receive traffic announce-
ments.
> Push the connector of the TMC anten-
na into the socket provided on the back
of the carrier plate without using exces-
sive force.
GPS-antenna
Unit antenna
The GPS antenna is integrated into the
housing.
!Danger of Death!
Make sure that your hands are not damp
and that the mains section is dry. Only
connect the mains section to a mains
supply with which such purposes are
permitted.
Note:
Remove the mains section if you are not
planning on using the Traffic Assist for a
long time.
Note:
The TMC antenna must be routed so
that your ability to drive the vehicle is not
impaired.
Note:
The integrated GPS antenna is not suita-
ble for use in vehicles with anti-glare win-
dows (metalised thermo-glass or metal
foil, indicated by the window label - SIG-
LA SOL, SIGLA CHROM, SIGLA,
KOOL-OF, SUNGATE, etc.) and vehi-
cles with fine-meshed heating wires in
the windows.
If this is the case, use an external GPS an-
tenna. Please consult your local specialist
dealer.