Becker MAP PILOT OPERATION GUIDE - Manual (Page 15)

15
GENERAL OPERATION >>>
> D
> GB
> F
> I
> E
> P
> NL
> DK
> S
> N
> FIN
> TR
> GR
> PL
> CZ
> H
> RUS
Content Manager Becker®
MAP PILOT
The Content Manager Becker® MAP
PILOT is a PC based application contain-
ing a number of important functions to
help you manage the content on your
Becker® MAP PILOT.
With the Content Manager Becker®
MAP PILOT you can:
• back up the content saved on the
Becker® MAP PILOT to your PC and
restore it later to your Becker® MAP
PILOT,
• download current content from the In-
ternet and install it on the Becker®
MAP PILOT.
To use the Content Manager Becker®
MAP PILOT, you will need the USB ca-
ble provided as well as a computer that
meets the following minimum require-
ments:
• Microsoft Windows XP (SP2), Vista or
Windows 7 operating system
• Microsoft Internet Explorer 7 or higher
• PC with USB 2.0
• Fast Internet connection with more
than 2 Mbit/s
• At least 10 GB hard disk space.
Installing the Content Manager
Becker® MAP PILOT
You can install the Content Manager
Becker® MAP PILOT on your computer
with the following steps:
> Connect the USB interface of the
Becker® MAP PILOT directly to the
USB port of the computer using the
USB cable provided.
After a short time, the Becker® MAP
PILOT is displayed as a removable storage
medium on the computer.
Installation should start automatically.
> Follow the instructions of the software.
The Content Manager Becker® MAP
PILOT can be started immediately after
installation.
This completes the installation procedure.
Starting the Content Manager
> Connect the USB interface of the
Becker® MAP PILOT directly to the
USB port of the computer using the
USB cable provided.
After a short time, the Becker® MAP
PILOT is displayed as a removable storage
medium on the computer.
> Click on
Start > All Programs on the
computer.
> Select Content Manager .
> Click on Content Manager .
The Content Manager Becker® MAP
PILOT is started.
Note:
When you connect the Becker® MAP
PILOT to the PC for the first time, the
PC installs all the necessary drivers and
then displays the message "Your unit is
now ready to use".
Note:
If installation does not start
automatically, start the Setup.exe file in
the “Content Manager” directory on the
removable storage medium.