Becker MAP PILOT OPERATION GUIDE - Manual (Page 13)

13
GENERAL OPERATION >>>
> D
> GB
> F
> I
> E
> P
> NL
> DK
> S
> N
> FIN
> TR
> GR
> PL
> CZ
> H
> RUS
Using the input menu
Some applications require input using the
input menu.
The characters input using the input
menu are displayed in the top line of text.
The middle section is used for character
entry. The bottom section can display a
list of all cities corresponding to the letters
entered so far when entering a city, for ex-
ample.
Entering characters
Characters are input by selecting them
with the rotary control/push button.
When a navigation destination is entered,
the Becker® MAP PILOT compares the
data with the stored data.
Only those letters that are still possible are
available for selection.
If you have selected enough letters, a list
automatically appears. Select the desired
entry from the list using the rotary con-
trol/push button.
Selecting from a list
Once a few letters of the desired selection
have been entered, you can select your
destination from the selection list.
> In the input menu, push the rotary con-
trol/push button downwards.
> Select the desired entry from the list us-
ing the rotary control/push button.
The entry is accepted and the selection list
is closed.
Note:
The input menus that are not used for
destination input are locked when your
vehicle is travelling at a speed in excess of
5 km/h. If you are currently in such an
input menu, a message indicating that
the menu has been locked will be dis-
played. The menus are enabled again
when the speed falls below 3 km/h.
Note:
Pressing the button deletes the last
character entered.
A space is entered when the underscore
character (_) is selected in the input
menu.
C