BDI 1242 TRAVERSE - Manual

Traverse 1242 Rect Coffee Table Traverse 1246 End Table
Traverse 1248 Console Table
A - 4mm Hex Wrench x 1
C - 1/4-20 x 89mm Screws x 4
To attach Legs to Shelf
D - 1/4-20 x 32mm Screws x 4
To attach Glass to Legs
B - 1/4-20 x 19mm Screws x 8
To attach Hubs
E - M6 Leveler x 4
TRAVERSE
Designed by Jason Guidry
These distinctive product configurations are protected by US and international
patents, trade dress, and/or copyright laws.
BDI are trademarks of Becker Designed, Inc.
All Rights reserved. © 2011 BDI
1242 1246 1248 Revision: 03-09-11
Component List
TRAVERSE tables are engineered for easy assembly. Carefully follow this procedure to prevent any damage.
Unpack and identify the components. The assembly workspace should be a non-marring surface such as clean carpet.
For missing hardware pieces, please contact BDI Customer Service at [email protected].
For all other concerns, please contact your BDI Retailer.
1242 1246 1248
ASSEMBLY INSTRUCTIONS
1
BDIUSA.COM [email protected]
Placement and Maintenance
TRAVERSE tables are designed for indoor use on level floors. Clean glass with glass cleaner, and wood veneer with a moist cloth.
F - Legs x 4
G - Shelf x 1
H - Hubs x 2
I - Glass x 1
H
H
F
F
F
F
I
G