BDI 2201 Marina - Manual

1
Your Marina Furniture is engineered for easy assembly. Carefully follow
this procedure to prevent any damage.
NOTE: This instruction sheet is intended for the 2201 and 2223 of the
Marina Table collection; model 2201 is shown for illustration.
Placement and Maintenance
Marina Furniture is designed for indoor use on level floors. Clean glass
with glass cleaner, and steel parts and wood veneer with a moist cloth.
Step 1
Unpack and identify the parts listed. The assembly workspace should be a
non-marring surface such as carpet. For missing hardware pieces please
contact BDI Customer Service at [email protected]. For all
other concerns, please contact your BDI Retailer.
Step 2
Attach brackets to legs.
Using the Medium Hex Wrench, fasten the Brackets (B) to Leg (A) with
the Mounting Screw (C). Assure correct orientation of bracket.
Component List
Designed by Cristian Wicha.
‘Marina’ is a trademark of Becker Designed, Inc.
All rights reserved. ©2009 Becker Designed, Inc.
Made in China. 22012223REV102609v3
M
a r i n a
2201
and
2223
a s s e m b l y i n s t r u c t i o n s
bdiusa
.
com customerservice
@
bdiusa
.
com
2201
2223
F - Rubber Bumper
Inserts x 4
G - Glass top x 1
E - Levelers x 4
C - Mounting Screw x 16
D - Stretchers x 2
Medium Hex Wrench x 1
A - Leg x 2
(Left and Right)
B - Bracket x 4
B x 4
A x 2
C x 8
B
B
Correct orientation of
bracket and leg.