BDI 9621 Deploy - Manual

1
B
D
eploy
®
Deploy ® is engineered for easy assembly. Carefully follow this
procedure to prevent any damage.
Placement and Maintenance
Deploy
® is designed for indoor use on level floors. Clean glass with
glass cleaner, and steel parts and wood veneer with a moist cloth.
Step 1
Unpack and Identify
Unpack and identify the components at left. The assembly
workspace should be a non-marring surface such as carpet. For
missing hardware pieces, please contact BDI Customer Service
at [email protected]. For all other concerns, please
contact your BDI Retailer.
Step 2
Unfold the metal legs on the Assembled Frame (A).
Component List
Designed by by BDI Design Studio.
These distinctive product configurations are protected by US and international
patents, trade dress, and/or copyright laws.
“Deploy” and BDI are trademarks of Becker Designed, Inc.
All Rights reserved. ©2009, BDI
Made in China. 96219631REV012210v3
a s s e m b l y i n s t r u c t i o n s
bdiusa
.
com customerservice
@
bdiusa
.
com
B - Glass Shelf Clip /
Screw
x 2
E - Glass Shelf Pin x 6
A - Assembled Frame x 1
C - Back Panel x 1
F - 10mm Shelf Pin x 4
I - Center Glass Shelf x 3
G - Shelf Bracket
x 2
H - Rubber Bumper Insert
x 11
J - Top Glass Shelf x 1
L1 - Allen Wrench x 1
L2 - Allen Wrench x 1
D - 20mm Back Panel
Shelf Pin
x 2
9621 and 9631
K - Velcro Strap and
Wood Screw
x 8
Step 3
Install Glass Shelf Clip (B) to the rear side of unfolded metal leg
using the supplied Allen Wrench (L2). Do not tighten set screws
until glass shelf is installed during Step 5.