BDI 1501G Stream - Manual (Page 2)

2
assembly instructions
bdiusa . com customerservice @ bdiusa . com
Step 3
Prepare to attach Wood Top
Carefully rotate 90 degrees so that the table is resting on its side ona
non-marring surface. For easiest installation find a paperback book
about 1” thick and place on floor between Metal Legs (C) as shown
below,or find non-abrasive materials to temporarily cover inside edge
of legs.
Step 4
Attach Wood Top
Carefully slide Lower Wood Shelf (E) into place being careful not to
bump the Metal Legs (C). Rest the Lower Wood Shelf (E) on the book
and attach using the Long Socket Screw (F) and Allen Wrench (A).
Paperback book
1” thick