BDI 1471G Tazz - Manual

1
Tazz is engineered for easy assembly. Carefully
follow this procedure to prevent any damage.
NOTE: This instruction sheet is intended for
the entire Tazz table collection; model 1472G is
shown for illustration.
Placement and Maintenance
Tazz is designed for indoor use on level floors. Clean
glass with glass cleaner and wood with a moist
cloth. Clean polished aluminum legs using a high-
quality aluminum polish and follow its manufacturer’s
instructions. More frequent application of polish for
cleaning will be required in coastal areas near salt water.
Step 1
Unpack and Identify
Unpack and identify the components at left. The assembly
workspace should be a non-marring surface such as carpet. For
missing hardware pieces, please contact BDI Customer Service at
[email protected]. For all other concerns, please contact
your BDI Retailer.
Step 2
Attach Legs to Wood Shelf
Place Wood Shelf (F) on its side on a soft surface in order to
prevent damage. Attach Legs (D) to Wood Shelf (F) ensuring the
tab of Leg (D) locks into the slot of the Mounting Plate. Using Hex
Wrench (A), slightly tighten Screws (C).
Component List
Designed by Dan Fritz .
These distinctive product configurations are protected by US and international patents,
trade dress, and/or copyright laws.
BDI is trademark of Becker Designed, Inc.
All rights reserved. ©2014, BDI
Made in China. 1471G1472G1476GREV122914v1
B - 1/4-20 x 12mm Screw
x 4
C - 1/4-20 x 19mm Screw
x 4
E - Glass Top x 1
D - Leg x 4
F - Wood Shelf x 1
A - 4mm Hex Wrench
x 1
TWO PERSON ASSEMBLY
F
C
D
F
D
Mounting
Plate
C
tazz
1471G,
1472G,1476G
tables
a s s e m b l y i n s t r u c t i o n s
bdiusa.com [email protected]