BDI 9930 totem - Manual (Page 4)

4
a s s e m b l y i n s t r u c t i o n s
bdiusa.com [email protected]
totem
9930
A10
A10
F
G
G
H
A9
A9
G
A9 x 4
A2
5mm Allen Wrench
Step 7
Attach Horizontal Mounting Bracket (H) to installed Swiveling
Brackets (G) with Screws (A9) and 5mm Allen Wrench (A2).
NOTE: Slots along Horizontal Mounting Bracket (H)
must be at BOTTOM. Be sure to position Swiveling
Bracket (G) so that each sits within recessed portion of
the Horizontal Mounting Bracket (H). (Circled below)
2 Person Task
A9
G
G
H
Step 6
Peel film from side of Neoprene Strip (A10) and attach to the outer edge of
each Swiveling Bracket (G) as illustrated below.
A10 x 4
Neoprene Strip