BDI 8239 NORA - Manual (Page 3)

3
aSSembly inStructionS
bdiuSa . com cuStomerService @ bdiuSa . com
nora
8239
and
8239-S
Step 5
Re-install Shelves
Position the cabinet right side up and then re-install Adjustable Shelves (J).
Optional Flat Panel TV Mount
This BDI cabinet is compatible with BDI’s Arena Flat-Panel TV
Mount #9970 and #9972 (sold separately), with the following
features:
• accommodates most TVs up to 60”, 175 lbs
• swivel allows rotating for optimal viewing
• allows adjustable TV mounting height
• accepts and routes cables to and from the TV
For more information, visit www.bdiusa.com
Step 6
Install Back Panel
Install both Back Panels (K) to the backside of the cabinet by inserting top
edge in upper channel, then tipping bottom edge forward and into lower
channel.
NOTE: Velcro straps are included as wire management for your
convenience.
For more information about the adjustable
levelers and troubleshooting assembly, be
sure to check out “Fine tuning your new
BDI Nora Home Theater Furniture” at
the end of these instructions.
The adjustable leveler glides on the
bottom, mid section of the cabinet
are accessible from inside the
cabinet using the
Hex Wrench (B).
The shelf pins located inside
the left and right cabinet space
may be repositioned, allowing
you to raise or lower each shelf
to the desired level.
K
B
A
2
1