BDI 9429 Icon - Manual (Page 2)

2
assembly instructions
bdiusa . com customerservice @ bdiusa . com
Step 5
Install the Shelf Brackets
Shelf Brackets can be adjusted to offer three different shelf positions.
Note: To reposition Shelf Brackets, it is not necessary to remove the
Back Panel.
H
E
E
Shelf Brackets x 4
Step 4
Install Back Panel and Wire Managements Straps
Back Panel is to be installed with small holes facing backward. DO
NOT FULLY TIGHTEN “E” SCREWS, as leaving them loose will facilitate
installation of Glass Shelves and Glass Top. BDI label should be on
bottom left corner of Back Panel.
Velcro straps are supplied to control cables. They can be screwed into
the steel at top and bottom of the arm or into the small holes on the
Back Panel.
L
K
H
E x 4