Front and rear hydraulic disk brake inspection – Baja Motorsports BR150-1 Operator's Manual User Manual
Page 42
39
FRONT AND REAR HYDRAULIC
DISK BRAKE INSPECTION
Brake hose
Front disk brake
caliper
Brake disk
Brake fluid level
Brake fluid cap
Brake hose
Brake fluid reservoir
Rear disk
brake caliper
Brake
Disk
Failing to maintain the brake shoes or pads could be hazardous.
Riding with worn brake shoes, pads, or shoes that are seriously worn,
will increase your chance of having an accident.
If you need to replace brake shoe pads, have your authorized service
center do the work. Inspecting and maintaining the brake shoe pads is
recommended. Replace the shoe pads in sets.
Brake hose
WARNING
1. Inspect front and rear disk brake calipers for leakage. If brake fluid
leaks, the safety of riding could be affected.
2. Inspect the brake hose for cracks, and the joint for leakage.
3. Check the brake fluid level in the brake fluid reservoir, if level is at
or below the LOWER mark, inspect brake pads for wear and hydraulic
system for leaks.
4. To add brake fluid, unscrew screws on top of the brake fluid
container. Add DOT3 or DOT4 brake fluid. Do not mix brake fluid types.