Cleaning oil filter, transmission oil – Baja Motorsports BR150-1 Operator's Manual User Manual
Page 34
31
CLEANING OIL FILTER,
TRANSMISSION OIL
Cleaning oil filter
1. Drain engine oil as instructed on page 30.
2. Remove oil filter plug (located on bottom left side of engine.
3. Remove screen filter and spring assembly.
4. Clean screen with solvent.
5. Re-install filter and refill with 1qt. oil (refer to page 10 for correct engine oil
type.
Spring Oil Strainer
Draining transmission oil
Adding transmission oil
Transmission oil fill bolt
1. Drain transmission oil by removing transmission oil drain bolt (located
on the bottom left of transmission).
2. Drain oil into a catch basin and dispose of properly at an oil reclaim
facility.
1. Add transmission oil by removing transmission oil fill bolt (located on
bottom left of transmission).
2. Add 8oz 80W-90 gear oil.
Transmission oil drain
bolt