Baja Motorsports BR150-1 Operator's Manual - Manual (Page 26)

23
CHAIN AND SHOCK ADJUSTMENT
Check the chain adjustment after the first two hours of
use. Readjust if it has more than 1/2” flex.
1. Loosen Nuts #1.
2. Turn Nut #2 clockwise in 1/2 turn increments, then turn Nut #1 until it
becomes tight.
3. Repeat the above steps until chain is adjusted to the desired tension.
CHAIN ADJUSTMENT
FRONT SHOCK ADJUSTMENT
There are five adjustable positions on the front shock. The default position is
in the middle set by the manufacturer.
Use a round nut wrench as you adjust the shock. The tension of shock spring
will increase as you screw to the left and decrease as you screw to the right.
Spring
adjustment
cam
Nut #2
Nut #1
3/8”-1/2”