Maintenance, Glass cleaning, Fireplace surface cleaning – Dimplex DF3033ST User Manual
Page 18

18
www.dimplex.com
Maintenance
To access the upper light bulb
area:
①
Remove front glass assembly.
②
upper bulbs are located in the
upper left and upper right corners
of fireplace (Figure 8).
③
Remove the upper light cover
for each bulb (two (2) Philips
screws each).
④
unscrew bulbs counter
clockwise.
⑤
Insert new bulbs.
⑥
Re-install upper light bracket.
⑦
Replace glass assembly.
glass Cleaning
The glass is cleaned in the factory
during the assembly operation.
During shipment, installation,
handling, etc., the glass may
collect dust particles; these can
be removed by dusting lightly with
a clean dry cloth.
To remove fingerprints or other
marks, the glass can be cleaned
with a damp cloth. To prevent
scratching, do not use abrasive
cleaners or spray liquids on the
glass surface.
Fireplace Surface
Cleaning
use a cloth dampened with
warm water only to clean painted
surfaces of the electric fireplace.
Do not use abrasive cleaners.