Dimplex DF3033ST - Manual (Page 14)

14 www.dimplex.com
Operation
B. Set Temperature
Press
F button to turn fireplace
on.
Press
H to raise thermostat.
Press g to lower thermostat.
Press both H and g to change °F
to °C.
C. Dimmer
Press the
F button to turn the
Flame/Heat on.
Repeatedly press the
J or I button
to decrease or increase the
brightness of the upper lights.
D. Flame Speed
Press the
F button to turn the
Flame/Heat on.
Press the
L button to increase the
speed of the flame.
Press the
K to decrease the
speed of the flame.
E. Sleep Timer
The Sleep Timer automatically
shuts off the fireplace after a
preset time (from 30 minutes to 8
hours).
Press the
F button to turn the
fireplace on.
To set the sleep timer press the
N
button.
Set the timer from 30 minutes
through 8 hours. The fireplace
will automatically turn off when
the sleep timer reaches zero (0)
minutes.
The Sleep Timer can be cancelled
at any time by pressing the M
button repeatedly until the sleep
timer displays “0”.
WARNINg: Disconnect
power before attempting any
maintenance or cleaning to
reduce the risk of fire, electric
shock or damage to persons.
F. Flame & Heat On/Off Button
Press the
F button to turn the
Flame/Heat function on. When B
is higher then
A the heat will come on. To turn
the heat off, lower the B so that
it’s setting is lower then the A.
The default temperature setting is
72°F (22°C).
!
NOTE: When using the
remote control the heater runs
on a thermostat. Press the