Baby Lock Embellisher (EMB12-2) Manual - Manual (Page 15)

Trouble Shooting
Needle bent or needle breakage:
1. Are you moving the materials too quickly?
2. Are the needles touching the cloth presser or needle plate?
3. Is there dust or lint around the edge of the needles, cloth presser, or holes of the needle
plate?
4. Does the free arm area need to be cleaned?
For problems other than bent needles or needle breakage,
please contact your Baby Lock retailer.
Specifications
Needle: #365A017
Number of needles: 12
Needle clamp holder: Round type (2.5 intervals between needles)
Feeding: Manual
Light bulb: 15W/120V or 15W/230V
Measurement: 15.9" x 6.7" x 11.8" (height)
405mm X 170mm X 300mm (height)
Weight: 12.8 pounds
5.8kg
12