Baby Lock Aventura (BLMAV) Instruction and Reference Guide - Manual (Page 95)

Zipper Insertion
Sewing S-19
U
T
IL
ITY S
T
IT
CH
ES
S
• Using the table below, refer to “Using the utility
stitch tables in the “Sewing” section” in the “Basic
operations” section.
* Stitch patterns can be selected directly by pressing the
numeric keys on the machine during preset utility stitch
mode. Refer to “Basic operations” section.
Inserting a centered zipper
Stitching is sewn on both pieces of fabric butted against each
other.
1 Right side of fabric
2 Stitching
3 End of zipper opening
a
Attach zigzag foot “J”.
b
Sew straight stitches up to the zipper opening.
With the right sides of the fabric facing each other, sew
reverse stitches after reaching the zipper opening.
c
Using a basting stitch, continue sewing to the edge of
the fabric.
1 Basting stitching
2 Reverse stitches
3 Wrong side of fabric
4 End of zipper opening
d
Press open the seam allowance from the wrong side of
the fabric.
1 Wrong side of fabric
e
Align the seam with the center of the zipper, and then
baste the zipper in place.
1 Wrong side of fabric
2 Basting stitching
3 Zipper
f
Remove about 5 cm (2 inches) from the end of the
basting on the outside.
1 Wrong side of fabric
2 Zipper basting
3 Outside basting
4 5 cm (2 inches)
g
Attach the presser foot holder to the right pin of zipper
foot “I”.
1 Pin on the right side
2 Needle drop point
Zipper Insertion
Stitch name Stitch
BL
M
A
V
P
re
sse
r f
o
o
t
B
L
MSP
/B
L
ML
R
B
L
210A
Stitch number
Straight stitch (Middle) 1-03 03 * 03 * J, I
1
2
3
1
2
3
4
1
1
2
3
4
1
2
3
2
1
I